1
|
Call
the Monitoring Station @ 1-877-FROULA1
(1-877-376-8511). You will need to give them your Account number and Password (if applicable).
Tell them you wish to place your system in Test Mode for a period of
time. During this time, any signal received
by the Monitoring Station will be effectively ignored. |
2
|
Arm
your system and trip a device! (Open a door or window, walk in front of
motion sensor, etc). Wait at least 60 seconds
before disarming. Repeat this test so that the alarm sends multiple
signals to the station. (Be sure to disarm twice to clear Alarm
condition). Remember that some devices in your system may be on a delay
- delays are designed to lower the chances of a false alarm, so the
system may not be truly armed immediately. Wait for at least 30-60
seconds before beginning your test after arming the system. |
3
|
Call
Monitoring Station to verify
appropriate
signals were received and have them remove system from Test. |
4
|
If
the Monitoring Station did not receive the appropriate signals, please
call us to arrange for the system to be checked. |
5
|
Keep
a log of your tests - they should be done monthly! |