At A Glance
|
|
Arm
|
[Code] + [ENT] Shortcuts: [COMMAND][1] Arms All;
[COMMAND][2] Arms Perimeter, entry zone is instant; [COMMAND][3] Arms
Perimeter, entry zone delays.
|
Disarm
|
[Code] + [ENT]
|
| Check Faulted
Zones |
Press
any numeric key [0-9]
and keypad will scroll
through faulted zones |
Smoke Reset
|
After silencing alarm with [Code] + [ENT], press [COMMAND][4][7] to reset
smoke detectors.
|
Code Change
|
[COMMAND][5][5]; Enter Old
Code + [ENT]; Enter New Code + [ENT]; Enter New Code Again + [ENT]. (To
ADD a code, [COMMAND][5][6]. To DELETE a code, [COMMAND][5][3].)
|
Chime Mode On/Off
|
[COMMAND][6]
|
Force Arm Over
Bad Zones
|
[Code]; Keypad displays [CHK AREA X]; Press [NEXT] thru the list of all
faulted points OR just press [COMMAND].
[FORCE ARM?] will
display at the end of the list. Press [ENT].
|
Power Down Panel
|
Pull one wire on NP7-12 battery
in panel. Disconnect AC power by pulling wire on terminal 1, upper left
corner of panel.
|
View Faulted
Zones
|
Press ANY NUMBER KEY on the
keypad. Faulted zones will scroll across keypad.
|
