This system is either a Vista
panel or operates like a Vista Panel:
| Arm: |
Code + [2] Away (Arms All); Code +
[3] Stay (Arms Perimeter only) |
| DisArm: |
Code + [1] OFF |
| Check Faulted
Zones |
Press [*] key. Panel will scroll
thru faulted zones. |
| Smoke Reset: |
Smoke Detectors mostly reset
automatically with these panels when alarm is silenced. However, the user may have to enter
Code + [1] OFF again to reset the smokes. There might be a reset
button on some
panels for 4-wire smokes. |
| Code Change: |
Code + [8] Code + User # + 4 new
digits. Most panels require a 2-digit user number. Vector
panels, Vista 10, 4110 and 4120 panels have 1-digit user numbers.
Larger panels require alpha keypads and will ask questions to complete
after the above process is done. |
| Chime Mode
On/Off: |
Code + [9] Chime |
| Bypass Zone(s): |
Code + [6] + Zone number(s).
Most panels use 2-digit zone numbers. The very large Vista 100 and
Vista 128 panels use 3-digit zone numbers. |
| Power Down Panel: |
Pull one wire from NP7-12 or NP4-12
battery, pull one AC wire. Most panels this will be terminal 1
on the far left bottom of panel. Some panels vary. Vector panels - AC
is term. 3 & 4. |
 Keypad: 5322 Panel: 4180 |
 Keypad: 5608 Panel: Alert 2 Wireless 5600 |
 Keypad: 5621 Panel: Alert 3 Wireless 5700 |
 Keypad: 4157 Panel: Vector 2000-3000 (4152/4153) |
 Keypad: 4137 LCD Fixed Alpha Panel: 4100 series |
 Keypad: 5137 Alpha Panel: 4100 series |
 Keypad: 6128 Panel: 4100 series or Vista |
 Keypad: 6139 Panel: 4100 series or Vista |
|